Securing The Lid Stopper; Installing The Lid Handle; Mounting The Side Shelf Handle, Serving Tray; Important - Pit Boss Sportsman PB0820S Guide De Montage

4. SECURING THE LID STOPPER

Parts Required:
1 x Lid Stopper (#3)
Installation:
• Secure the Lid Stopper onto the top of the Main Barrel using the
pre-installed screw on top of the Main Barrel.

5. INSTALLING THE LID HANDLE

Parts Required:
2 x Lid Handle Bezel (#11)
1 x Lid Handle (#12)
Installation:
• Remove the pre-installed screws from the Lid Handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add a Lid Handle
Bezel on the screw, then hand-tighten the screw (from the inside) into the
Lid Handle. Repeat the same installation for the other end of Lid Handle.

6. MOUNTING THE SIDE SHELF HANDLE, SERVING TRAY

Parts Required:
2 x Serving Tray Handle (#25)
1 x Serving Tray (#26)
1 x Side Shelf Handle (#27)
4 x Screw (#A)
4 x Locking Washer (#C)
4 x Washer (#B)
Installation:
• Mount the Side Shelf Handle onto the Main Barrel using four screws,
locking washers, and washers.
• Mount the Serving Tray Handles onto the Serving Tray using the two
pre-installed screws on each handle. Place the Serving Tray onto the Side
Shelf Handle. It will rest directly on the frame of the Side Shelf Handle.
IMPORTANT: Avoid using the side shelf handle to move or lift the
grill. The weight of the unit will cause the side shelf handle to bend
or break, which is not covered by warranty.
4
3
5
11
12
11
11
6
25
25
26
27
8