Paper Specifications - Star TSP400 Série Guide D'utilisation

Paper Specifications

Recommended paper-roll types:
NIPPON PAPER INDUSTRIES
NEW OJI PAPER Co.,Ltd.
Many paper types are available. Please use paper that meets the following
criteria.
1. Paper type
2. Paper width
3. Paper thickness
4. Paper rolls
TF50KS-E
TF62KS-E
KF-730
General high-sensitivity thermal paper
General high-sensitivity label paper
• If you use medium or low sensitivity paper,
run a test print to check operation. If the
printer is unable to print at 50mm/sec, set the
print speed to 25mm/sec.
0
60mm ~ 82 mm
-1
• When using narrow paper, be sure that the
paper is at least wide enough to keep the platen
and head from touching. Never use paper that
allows the head to touch the platen.
• If the paper width is 70mm or less, do not run
the platen in reverse.
General thermal paper: 60 ~ 150µm
Label paper:
Internal diameter:
Outer diameter:
Rolls must have the thermal side facing in-
wards. Never use tape or other adhesive to
fasten the trailing end of the paper to the roller.
– 50 –
Max. 160µm
25.4mm (1 inch)
115mm