Transport And Movement - S&P CE ATEX Mode D'emploi

Danger of
entrapment
Danger when
handling and moving
the product
Danger of burns
Recycling symbol
General information

TRANSPORT AND MOVEMENT

The following considerations must be taken into account for transport:
• Protect the fan from atmospheric agents
• Protect the fan from any blow that could damage it or jeopardize its physical
integrity.
• During transport, avoid vibrations that might affect the bearings.
• When lifting or moving the fan, the intended attachment points or eye bolts
must be used, where available.
• When moving the fan, use equipment that has adequate weight-handling ca-
pacity.
• Lifting the fan may cause it to oscillate, which can be dangerous. Never stand
under the fan.
STORAGE
The following considerations should be taken into account for storage:
• We advise installing the fan immediately after receipt.
• If this is not possible, the fan should be stored in its original packaging in a
closed, dry and weatherproof place. The fan must be protected against dirt, UV
radiation and temperature changes.
This symbol warns of the danger of entrapment due to
rotating equipment parts.
This symbol warns against hazards when the product
is handled with cranes or hoists.
This symbol warns of the danger of burns when
touching surfaces that may be at high temperatures.
This symbol indicates information related to
waste disposal.
This symbol indicates information on using the
equipment any other useful information.
19