Maintenance And Cleaning - S&P TURBO-351 N Notice D'utilisation

OPERATION
• Once we have checked that the grid voltage corresponds with that shown on the device's
data plate and that the speed selector is in the halt position, connect the device to the grid.
• Select the speed at which we want the device to work, by rotating the speed selector (Fig.
1), in line with the following values:
0
1
2
3
• Once the operation speed is selected, the device starts up automatically.
• The devices in the TURBO series have an adjustable head, which you can bend upwards or
downwards in line with your needs (Fig. 2).

MAINTENANCE AND CLEANING

• Ensure that the device is disconnected from the electrical grid before carrying out any main-
tenance and/or operation work.
• Never use petrol or aggressive and/or abrasive dissolvents to clean the device, using ins-
tead a cloth dampened with water.
• In order to access the blade of the device, remove the fixing ring from the front protection
grille (Fig. 3), bearing in mind that a screwdriver is required to remove the safety screw.
• Once the cleaning operation is complete, remember to return the protection grille fixing ring
using the safety screw, in order to avoid accidents.
Important: Make sure the fan is disconnected from power supply before removing the pro-
tection.
PUTTING OUT OF SERVICE AND RECYCLING
• Should it be put out of service, even if only temporarily, we recommend keeping the device
in a dry place, free from dust, within its original packaging.
• EEC legislation and our undertaking with future generations mean we should
always recycle materials; please do not forget to deposit all excess packaging
elements in the corresponding recycling bins, and take the replaced devices to
the nearest Waste Management Plant.
THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY DAMAGE TO PERSONS AND
OBJECTS DERIVING FROM BREACH OF THESE WARNINGS.
Halt
Slow speed
Medium speed
Quick speed
10