Right Side; Tools Required - R&G CP0417BL Instructions De Montage

LEGEND
ITEM 1 = CRASH PROTECTOR CAPS (BC0002) (x2).
ITEM 2 = M10 x 1.25 x 80mm LONG HEX HEAD BOLTS (x2).
ITEM 3 = M10 x 19mm OD WASHERS (x2).
ITEM 4 = LOCK-WASHERS (LW0001) (x2).
ITEM 5 = M10 x 1.25 x 100mm LONG CAP HEAD BOLTS (x3).
ITEM 6 = M10 x 16mm OD WASHERS (x4).
ITEM 7 = MOUNTING BLOCK LEFT (M0498) (x1).
ITEM 8 = SPACER (S0253 – 6mm LONG) (x1).
ITEM 9 = M10 x 1.25 x 60mm LONG CAP HEAD BOLT (x1).
ITEM 10 = AERO SPACER (S0507 – 20mm LONG) (x2).
ITEM 11 = CRASH PROTECTOR (B0061 with CS341) (x2).
ITEM 12 = MOUNTING BLOCK RIGHT (M0499) (x1).
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301

RIGHT SIDE

– the rubber washers should be thrown away!

TOOLS REQUIRED


Socket set to include 4, 5, 6 & 8mm AF socket and wrench.

Socket set to include 15 & 17mm socket and wrench.

Small flat headed screwdriver.

Torque wrench (up to 40N/m).
R&G Racing
www.rg-racing.com
CP0417
Email: info@rg-racing.com