Operation
6 OPERATION
6.1
Starting the appliance manually
1. Switch on the appliance with
For unscheduled edge mowing: see chapter
7.5 "Edge mowing with a manual start",
page 55.
2. Start the appliance manually with
6.2
Cancelling mowing
■
Press
on the base station (08/4) or on the
appliance.
The appliance moves automatically into the
base station. It deletes the mowing plan of
the current day and starts again the next day
for the set time.
■
Press
on the appliance.
The mowing is interrupted for half an hour.
■
Press
on the appliance.
The appliance is switched off.
NOTE
In dangerous situations, the appliance
can be stopped with the STOP but-
ton (08/2).
6.3
Mowing the secondary area (01/NF)
1. Lift the appliance and place in the secondary
area by hand.
2. Switch on the appliance with
3. Call up the main menu with
* Settings
4.
or
* Sub zone mowing
5.
or
6. Select the mowing time with
7. Start the appliance manually with
Depending on the setting: The appliance mows
for the set time period and then switches off or
mows until the rechargeable battery is flat.
After mowing the secondary area, place the ap-
pliance in the base station again by hand.
457397_a
7 SETTINGS
7.1
.
1. Call up the main menu with
2.
.
3. Select the required menu item with
4. Make the settings.
5. Return to the main menu with
7.2
1.
2. Activating/deactivating the button tones:
7.3
.
.
or
.
If the rain sensor is activated, the appliance
.
moves back into the base station when the rain
begins. It remains there until the rain sensor has
dried. Then it waits for the time period that is set
as the delay before it continues mowing.
Calling up the setting – General
Note: The asterisk * in front of the menu item
indicates that it has just been selected.
* Settings
or
and accept with
Note: The menu items are described in the
following sections.
NOTE
Further menu items: see chapter 5.2
"Making the basic settings", page 52.
Activating/deactivating the button tones
* Key clicks
or
■
Activate
or
Activate the button tones.
■
Deactivate
or
Deactivate the button tones.
Setting the rain sensor
NOTE
Mowing when the grass is dry reduces
soiling.
By activating the rain sensor and setting
a delay time, it is possible to prevent the
appliance mowing when the grass is
wet.
.
or
.
.
:
:
53