Numark DXM09 Manuel D'utilisation Du Propriétaire page 2

HOUSE/CLUB AMP
TO AMP
TO AMP
OR
Make sure all items listed on the front of this guide are included in the box.
1. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
2. Study this setup diagram.
3. Place mixer in an appropriate position for operation.
4. Make sure all devices are turned off and all faders are at "zero"
5. Connect all stereo input sources as indicated in the diagram.
6. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio
sources.
7. Plug your mixer and other devices into AC power.
8. Switch everything on in the following order.
• audio input sources (i.e. turntables or CD players)
• your mixer
• last, any amplifiers
9. When turning off, always reverse this operation by,
• turning off amplifiers
• your mixer
• last, any input devices
10. Go to http://www.numark.com
BOOTH AMP
CD BURNER
MIXER QUICK SETUP GUIDE (ENGLISH)
for product registration.
TO FADER
TO PHONO
START
TO LINE
FROM
FADER
START
2
TO MIC
TO LINE