Keeping Data In Memory; Service And Repair; Service And Repair Contact; Accessories/Parts For The Product - Hürner CNC ECO 250 2.0 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
5.6

Keeping Data in Memory

When the cable or storage media is unplugged, a "Delete
Memory" message is displayed. Press the STOP/RESET key to
keep the current report data in memory. The process can
then be repeated once again.
Make a habit of handling the internal storage as descri-
bed at the beginning of Sect. 5, to maintain data inte-
grity and avoid any inadvertent deletion of the reports
Important
in memory.
6

Service and Repair

As the product is used in applications that are sensitive to
safety considerations, having it serviced and repaired only
by trained, specialized staff is highly recommended. Thus,
constantly high standards of operation quality and safety
are maintained. Feel free to request information on our
authorized service partner in your area at the address in
Sect. 7.
Non-compliance with this provision will dispense the
manufacturer from any warranty and liability claims for
the product and any consequential damage.
Important
7

Service and Repair Contact

HÜRNER Schweisstechnik
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Web: www.huerner.de
We reserve the right to change technical specifica-
tions of the product without prior notice.
Info
8

Accessories/Parts for the Product

Facing Tool Blade for HÜRNER CNC ECO 250 2.0
Only when genuine spare parts are used, liability
and warranty on the part of the manufacturer will
remain sound. For non-genuine parts neither liabil-
Info
ity nor warranty can be assumed.
For consultation and ordering spare parts, refer to the seller
or manufacturer of the product.
Version October 2022
Tel.: +49 (0)6401 9127 0
Fax: +49 (0)6401 9127 39
E-mail: info@huerner.de
HÜRNER CNC ECO 250 2.0 User's Manual 33
EN