Controllable Functions - Trix 23030 Mode D'emploi

• The CVs can be programmed, as you desire. PoM (Pro-
gramming on the layout track) is only possible with those
CVs marked in the CV table. PoM must be supported
by your central controller (see the instructions for your
controller).
• The default settings (factory settings) can be produced
repeatedly.
• All of the functions can be controlled according to the
function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.
10

Controllable Functions

Headlights / Red marker light
Long distance headlights
Interior lights
Engineer's cab lighting
Current-conducting coupler (lighting for
all cars)
Trix Systems
1
F0
F1
F2
F3
F4