Controllable Functions - Trix IC 2 Mode D'emploi

function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.
10

Controllable Functions

Headlights
Long distance headlights 1
Train destination sign
Current-conducting coupler
(lighting for all cars)
Engineer's cab lighting
Switching headlights
(2 x red -> 3 x white)
only with white headlights
1
reverse unit included / For headlight / marker light
2
changeover dependent on a locomotive we recommend
setting the function decoder on the car to the address
of the locomotive or setting up a double combination
(locomotive / cab control car) in the locomotive controller
(CSI/CSII/CSIII).
F0
F1
F2
F3
F4
2