4 Operation
4.1 Infrared remote control
To insert the batteries (2 × 1 .5 V, size A A A), re-
move the battery compartment cover on the rear
side of the remote control . Insert the batteries
as indicated in the battery compartment . Close
the compartment with the cover . If the remote
control is not in use for a longer period of time,
remove the batteries as a precaution to prevent
any damage due to battery leakage .
When you press a button on the remote
control, always direct the remote control to-
wards the infrared sensor (D) . There must be
no obstacles between the remote control and
the sensor .
If the range of the remote control decreases, the
batteries are exhausted and must be replaced .
Never put batteries in the household
waste . Always dispose of the batteries
in accordance with local regulations .
4.2 Replaying music titles
After applying the 12 V operating voltage, the
module is switched on . The display will show
.
Welcome
Inserting a replay medium
– Insert a CD with the lettering facing up into
the CD slot (A) until it is pulled in automat-
ically .
– Connect a USB flash drive to the USB port (B)
or connect a hard disk (with individual power
supply, if required) to the USB port .
– Insert a memory card into the memory card
slot (C), the notched corner of the card to the
right . To remove the card, slightly push it in
to eject the card from the slot .
B
DISC
TR 03
03:19 CDA
C
SD/SDHC CARD
After reading in a medium, its replay will start
automatically . All operating options are listed
in chapter 7 .
5 Maintenance
Protect the module from dust, vibrations, hu-
midity and heat . For cleaning only use a dry, soft
cloth; never use water or chemicals .
Note concerning sound interruptions and reading
errors: Cigarette smoke and dust will easily pene-
trate through all openings of the module and will
also settle on the optics of the laser sampling system .
If this deposit should cause reading errors and sound
interruptions, the CD player must be cleaned by skilled
personnel . Please note that there will be a charge on
cleaning, even during the warranty period!
6 Specifications
Frequency range: . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . < 0 .1 %
Channel separation: . . . > 60 dB
S / N ratio: . . . . . . . . . . . > 70 dB
Audio output: . . . . . . . . 1 .2 V
Power supply: . . . . . . . . ⎓ 12 V, 800 mA
Ambient temperature: . 0 – 40 °C
Dimensions: . . . . . . . . . 174 × 52 × 160 mm*
Mounting cutout: . . . . . 155 × 50 × 150 mm*
Weight: . . . . . . . . . . . . 1 .145 kg
A
D
FUNC
FOLDER
* width × height × depth
MUTE
M-32CD
REMAIN
REPEAT
PROG
9