Publicité
Code
Spiral Premium box profi le set
80131246
With capacity of up to 3.8m of acrylic canvas with a 78mm axis and up to a 6x3 and a 5x3.5 m box (maximum width
by projection: the size of the system on which the semibox is assembled).
Spiral Premium box cover kit
The kit can be used for motor or gear.
80131275
The clearance between the profi le covers and the bell facilitates assembly in A1 Premium and Indico I1/I2/I3 systems.
The cover and the bell join tautly when the semibox inclination is locked.
M1 Spiral Premium centre support to square profi le
80131283
For M1 Premium awnings with width greater than 4.5m.
A1 Spiral Premium centre support to wall-ceiling
80131427
For A1 Premium awnings with width greater than 4.5m.
Spiral Premium support set for axis-profi le (and covers)
M1 Premium Plus regulation range:
80081621
•
0°-65° with Premium side connectors
80081629
•
0°-40° with Premium lower connectors
Spiral Premium is NOT compatible with "M1/M2 axis-profi le support", "Threaded Gel gear" or "Rescue operation motor"
Spiral Premium wall-ceiling support
Also compatible with "M1 Premium Plus extruded wall support"
Spiral Premium semibox is NOT compatible with:
80081634
•
"M1 Premium Plus 2-bore casting wall-ceiling support"
•
"M1 Premium Plus 4-bore casting wall-ceiling support"
•
Threaded Gel gear
A1 Premium Plus support set
A1 Premium Plus regulation range:
•
0°-72° with Premium side connectors
•
0°-50° with Premium lower connectors
80081078
Spiral Premium semibox is NOT compatible with:
•
"A1 Smart support"
•
Side connector assembled on 1.25 m, 1.5 m and 1.75 m arms when gear is inside the support (with gear and
those arm sizes, use lower connector or gear on the outside).
•
Threaded Gel gear
Premium side connector set
Also compatible with "Premium lower connector", although the maximum canvas protection tilt is reduced about 25°
80081662
compared to the side connector.
The use of Premium front connector with Spiral Premium semibox is not recommended.
Stopper pivot for charge profi le
80081550
Recommended for Premium awnings with inclination greater than 45°.
Injection anchors set for box
To assemble the Spiral Premium semibox with straight point Indico I1-I2-I3 arms.
NOT compatible with "gear outside"
Spiral Premium semibox is NOT compatible with:
80040266
•
"Mini support with pivot"
•
"Beam windbreaker 40 mm casting anchor"
•
Injection anchors "with pivot" or "without pivot"
•
Threaded Gel gear
SPIRAL PREMIUM • SPIRAL PREMIUM • SPIRAL PREMIUM
Description
SPIRAL PREMIUM
Image
5
Publicité
