Replacement Flaps; Replacement Parts And Accessories - Petsafe PPA11-14766 Manuel D'installation

Replacement Flaps

Replace & Adjust
During extreme changes in weather, vinyl flaps can shrink during cold months and stretch in
warmer months. Easily replace or adjust to ensure a snug fit during seasonal changes.
To Replace: Remove screws
from the interior frame of pet
door.
To Adjust: Slightly loosen
screws from interior frame of
pet door.

Replacement Parts and Accessories

To purchase replacement parts for your PetSafe
Care Center at 1-800-732-2677 or visit our website at www.petsafe.net.
Component
Small Replacement Flap
Medium Replacement Flap
Large Replacement Flap
Small Closing Panel
Medium Closing Panel
Large Closing Panel
White Latch Lock Assembly
Installation Hardware Kit
Adhesive
12
Remove bar and flap.
Slightly move bar away
from flap.
Sliding Glass Pet Door, contact our Customer
®
1-800-732-2677
Replace new vinyl flap and
position horizontally and
vertically to fit into door frame.
Replace existing bar and
tighten screws in place.
Adjust flap horizontally
and/or vertically to fit
into door frame. Push bar
towards flap and tighten
screws in place.
Replacement Part Number
PAC11-11037
PAC11-11038
PAC11-11039
MPA00-12831
MPA00-12832
MPA00-12833
MPA00-12620
MPA00-11823
MPA00-15000