Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USAGE
Starting the Pocket Mod
Place both hands on the handlebars. Slowly push forward with
one foot and apply the throttle.
Note: Keep both feet on the base fairing when unit is in motion.
REPAIR AND MAINTENANCE
Turn power switch "OFF" before beginning repair or maintenance:
• Read the instructions
• Remove charger plug
• Turn the power switch off
Testing the Brake
To use the brake, squeeze the lever to increase the pressure on the brake. The brake lever is fitted with a cable
adjuster to compensate for cable stretch and/or to fine-tune the lever movement to brake engagement. If brake is not
engaging properly, follow instructions for adjusting the brakes.
Adjusting the Brake
Tool Required: 10 mm wrench
1
To adjust the tension, thread the brake lever adjuster on
the hand brake in or out 1/4 to 1/2 turn until the desired brake
adjustment is attained. Most adjustments are complete at this
step. If brake still needs further adjustment, proceed to step 2.
• Secure the unit under repair
• Exercise caution around
exposed parts
2
If brake is too tight or has too much slack,
use a 10 mm wrench to loosen the nut for
additional adjustment on the brake cable on the
rear wheel. Securely tighten nut when done.
Stopping the Pocket Mod
Release the throttle and apply the brake.
Note: When coming to a complete stop, place both feet on the
ground to balance the unit.
• Contact Razor customer service
if unsure about any repair or
maintenance
7
WARNING: The brake is
capable of skidding the tire and
throwing an unsuspecting rider.
Practice in an open area, free from
obstacles, until you are familiar with
the brake function. Avoid skidding to
a stop as this can cause you to lose
control or damage the rear tire.
Note: The brake lever contains a
safety switch to cut power to the
motor when the brake is applied. In
an emergency, applying the brake
will always stop the product from
moving. Do not disable or replace
this lever with anything other than a
genuine Razor replacement part.
Publicité
Table des Matières
