Repair And Maintenance; Replacing The Wheels - Razor RDS Guide D'utilisation

REPAIR AND MAINTENANCE

q Replacing the Tires/Tubes
Tools Required: 5 mm Allen Wrench
1
Completely deflate the tire. Use
a 5 mm Allen wrench to remove the
four bolts on the hub. Remove the
worn/damaged tire or inner tube
and replace it with a new one.
Note: Be careful not to lose the
four nuts on the opposite side of
the hub.
q Replacing the Wheels
Tools Required: 5 mm Allen Wrench
1
Front wheel sequence.
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D.
code (located on the bottom of the deck) available for better assistance.
2
Assemble the hub using the
diagram at right. Tighten bolts
using 5 mm Allen wrench.
Re-inflate. (Do not exceed 60 PSI.)
2
Securely tighten the bolt
as shown.
Nuts
Bearings
Inner Tube
3
Rear wheel sequence.
4
Wheel Hub
Fastener Bolts
Bearings
Tire
4
Securely tighten the bolt
as shown.