Razor POCKET MOD Mode D'emploi page 5

ASSEMBLY AND SET -UP
Positioning the Brake Lever
Tool Required: 5 mm Allen Wrench.
1
Adjust angle of the brake lever to
a comfortable position for the rider
by turning back and forth.
Attaching the Front Wheel
Tools Required: Two (2) 15 mm Wrenches.
1
Remove the plastic packing
material from the front fork.
2
Securely tighten the bolt using a
5 mm Allen wrench.
2
Insert the wheel into the front
fork with the lock washers on the
outside of the fork.
lock
washer
nut
3
Insert the tab on the lock
washer into the hole on the front
fork and tighten the nuts using two
15 mm wrenches.
4