Replacing The Fuse - Razor POCKET MOD Mode D'emploi

REPAIR AND MAINTENANCE
Front Wheel Replacement
Tools Required: Phillips Screwdriver and 15 mm Wrench
1
Remove the nuts on both sides
of the front axle using a 15 mm
wrench then remove the axle safety
washers (note hardware sequence).

Replacing the Fuse

Tools Required: Phillips Screwdriver
Turn power switch OFF.
1
Lift up the seat and loosen
the four (4) screws in the storage
compartment and remove the tray.
2
Insert the wheel into the front
fork with the lock washers on the
outside of the fork.
2
Locate fuse box on top of
battery. Open the fuse cover to
expose the fuse.
3
Insert the tab on the lock
washer into the hole on the front
fork and tighten the nuts using two
(2) 15 mm wrenches.
30 Amp
3
Remove the fuse and replace
with a new one of equal amperage.
Close the fuse box. Reattach seat/
storage compartment.
9
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.