Memory Management - DeFelsko PosiTector SPG Manuel D'instructions

Set Clock
All measurements are date and time stamped (24-hour format)
when stored into memory. It is therefore important to set the
correct date and time. Use the
value, and the
and time setting can also be viewed at the top of the main menu.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
The battery state indicator symbol is calibrated for the selected
battery type. No damage will occur if the battery type used in the
Gage does not match the selected battery type.
A statistical summary will appear on the display. Remove the last
reading by pressing the
– Average
– Maximum Value
X
HiLo Alarm
Allows Gage to visibly and audibly alert the user when readings
exceed user-specified limits.
The PosiTector SPG has internal memory storage for recording
measurement data. Stored measurements can be reviewed
on-screen or accessed via computers, tablets and smart phones.
All stored measurements are date and time-stamped.
symbol appears when the Gage is set to store measurement data.
Standard models
batches. "New Batch" closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
and buttons to adjust it. The current date
Statistics Mode
X
button. Press

Memory Management

store up to 1,000 readings in one batch.
store 250,000 readings in up to 1,000
and buttons to select a
to clear statistics.
– Standard Deviation
– Minimum Value
6
The