DeFelsko PosiTector SPG Manuel D'instructions page 10

measurement data using the cloud.
For more information on our PosiSoft solutions, see:
www.defelsko.com/posisoft
WiFi
Allows connection to your local wireless network or mobile
hot spot. Ideal for using your network's internet connection for
synchronizing stored measurements with PosiSoft.net and
PosiSoft Desktop (pg. 7). See www.defelsko.com/wifi
USB
When USB Drive is enabled
mass storage device class which provides users with a simple
interface to retrieve stored data in a manner similar to USB flash
drives and digital cameras. USB Drive is also available to import
stored measurements into PosiSoft Desktop software (pg. 7).
NOTE:
When connected, power is supplied through the
USB-C cable. The batteries are not used and the body will not
automatically power down.
Stream
Stream individual readings to a USB connected computer via a
serial protocol. Ideal for use with serial compatible SPC data
collection software.
For more information on USB Keyboard and Streaming
NOTE:
visit: www.defelsko.com/usb/stream
Keyboard
When enabled and connected to a computer, the PosiTector will
be recognized as a Keyboard. Readings are sent to the computer
as they are taken, emulating keystrokes, followed by a carriage
return.
Sync .net Now
The above WiFi and USB menus contain a Sync .net Now
option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
Connect Menu
(Advanced models only)
(Advanced models only)
(Advanced models only)
8
, the PosiTector uses a USB