Memory Management - DeFelsko PosiTector GLS Mode D'emploi

Differential
Automatically calculates the difference between the current
reading and a stored reference value.
The PosiTector GLS has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-
screen or accessed via computers, tablets and smart phones. All
stored measurements are date and time-stamped. The
appears when the Gage is set to store measurement data.
Standard models
batches. "New Batch" closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both
the current display. The last 100 screen captures are stored in
memory and can be accessed when connected to a computer
(see PosiSoft USB Drive below).
Accessing Stored Measurement Data
DeFelsko offers the following free solutions for viewing, analyzing
and reporting data:
PosiSoft USB Drive - Connect the Gage to a PC/Mac using the
supplied USB-C cable. View and print readings and graphs using
universal PC/Mac web browsers or file explorers. No software or
internet connection required.

Memory Management

store up to 1,000 readings in one batch.
store 250,000 readings in up to 1,000
and buttons simultaneously to save an image of
8
symbol
Create a new batch
(Advanced only)
Restore brightness
after dimming