Memory Management - DeFelsko PosiTector 6000 Notice D'instruction

The PosiTector 6000 has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-
screen or accessed via computers, tablets and smart phones. All
stored measurements are date and time-stamped. The
appears when the Gage is set to store measurement data.
Standard models
batches. "New Batch" closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both
the current display. The last 100 screen captures are stored in
memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 10).
New PA2
Helps determine if film thickness over a large area conforms
to user specified min/max levels. See www.defelsko.com/pa2
New 90/10
Helps determine if a coating system complies with the IMO
performance standard for protective coatings.
See www.defelsko.com/9010
New 19840
Helps determine if a protective coating system complies with the
ISO 19840 acceptance criteria for measuring coating thickness
on rough substrates. See www.defelsko.com/19840

Memory Management

store up to 1,000 readings in one batch.
store 250,000 readings in up to 1,000
and buttons simultaneously to save an image of
9
symbol
Create a new batch
(Advanced only)
Restore brightness
after dimming