Laars MagnaTherm FT CFH1000 Manuel D'utilisation page 7

MagnaTherm FT User's Manual
Typical Numeric Keypad Menu
NOTE: You can always tell exactly where you have navigated
to by looking at the icons in the Navigation Bar.
In this example you are in
Home / Configure / Central Heat / Central Heat One
A Typical Numeric Keypad Entry Screen.
Remember to always save the new setting with the
The "Back" button jumps to the previous screen.
A Typical Selection Screen.
Shows the current setting
of the Parameter.
These windows will reflect
the allowable ranges of the
parameter
To delete the current setting before
entering in the new value.
"Up and Down" arrows are used to
increment the setting accordingly.
The "Enter" button is used to
accept the new value.
This is the indicator that will be
button.
shown when the correct password
has been entered to allow the
setting to change.
The highlighted button (orange)
shows which one is selected.
Some screens may only allow you
to set one or the other, while some
other screens (example: pump
selection) will allow you to select
any or all of the options.
Page 7