4.
Check that the speed control is set to O.
5.
Put the plug into the power socket (switch it on, if it's switchable).
6.
Move the speed control to the 1, 2 or 3 position to operate your food processor.
7.
Switch the appliance off by moving the speed control to the 0 position and unplug it.
8.
Hold the speed control in the Y position to operate your food processor in short, controlled bursts.
9.
Release the control to stop.
USING THE BLENDER
The general assembly steps are shown in figure A.
1.
Lower the blender jug on to the motor unit, then turn the jug clockwise, to lock it in place.
2.
Remove the lid.
3.
Put the ingredients into the blender jug.
4.
Replace the lid.
5.
Align the pips on the cap with the slots in the hole in the lid, fit the cap, and turn it clockwise to lock
it.
6.
Don't run the appliance without fitting the cap.
7.
To add ingredients while the blender is working, remove the cap, pour the new ingredients through
the hole, then replace the cap.
8.
Once finished, switch the appliance off (0) and unplug it.
9.
Turn the blender jug anti-clockwise, and lift it off the motor unit.
CRUSHED ICE
1.
For best results, full the jug with between 150ml and 500ml of ice cubes.
2.
Put the lid on the blender, then:
3.
Turn the speed control to Y for a second or two, then release it.
4.
Check the results, and adjust.
USING THE PROCESSOR
The general assembly steps are shown in figure B.
1.
Fit the spindle to the top of the motor unit.
2.
Lower the bowl on to the motor unit, then turn it clockwise to lock it in place.
3.
Fit the drive shaft.
4.
Fit the chopping blade.
5.
Put the ingredients into the bowl.
6.
Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise
to lock the tab into the top of the handle.
7.
Once finished, switch the appliance off (0) and unplug it.
8.
Turn the jug anti-clockwise, and lift it off the motor unit.
USING THE MIXER/CREAMER ATTACHMENT
The general assembly steps are shown in figure C.
Use the mixer to mix ingredients together.
Use the creamer to thicken cream, to beat eggs, and to cream eggs and sugar together.
1.
Fit the spindle to the top of the motor unit.
2.
Lower the bowl on to the motor unit, then turn it clockwise to lock it in place.
3.
Fit the drive shaft.
4.
Fit the mixer or creamer attachment.
5.
Put the ingredients into the bowl.
6.
Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise
to lock the tab into the top of the handle.
•
To add ingredients while the motor is running, lift the pusher out of the tube, add the ingredients
through the tube then replace the pusher.
•
To remove the lid, turn it anti-clockwise to unlock it, then lift it off.
5
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE