Black Diamond GUIDE BT Instructions page 21

Bluetooth enabled
DANGER Risk of a not transmitting device due to enabled Bluetooth
The Bluetooth mode is supposed for device management and training mode only. Never use
the Bluetooth mode in avalanche terrain!
Settings are available for the following features:
Feature
Battery type (Alkaline/Lithium)
Auto-Search-to-Send timeout (60 s/90 s/120 s)
Group check ON/OFF
Group check pro-mode ON/OFF
Send-Vibra ON/OFF
Analog mode ON/OFF
Scan mode (regular/detailed)
Mark range (5 m/20 m/MaxRange)
Further useful content in the PIEPS APP:
•
Training scenarios
•
Basic knowledge
•
Software Updates
•
Manuals
6. TROUBLESHOOTING, MAINTENANCE, STORAGE, DISPOSAL
6.1 TROUBLESHOOTING
Error Description
No indication on the display
E0 High current
This error disappears after the self-check.
E1 System configuration
This error remains on the display.
The device is not serviceable.
E2 Transmitter or receiver or amplifier
E3 The error disappears after the self-check.
E4
Manual BLACK DIAMOND GUIDE BT/RECON BT | 04/2020
Connection to mobile device established
GUIDE BT RECON BT
✓
✓
✓
Measure
Check the device for physical damage. Check the
battery capacity, type and polarity (+,-). Replace the
batteries. Take the device to your retailer.
Take the device to your retailer.
Take the device to your retailer.
Repeat the self-check in an area free from
interference (outdoors) and check for electronic,
✓
✓
✓
✓
✓
✓
✓
✓
20 / 23