Black Diamond GUIDE BT Instructions page 11

4A
Firmware version
Battery capacity/type
(AL=Alkaline,
LI=Lithium)
Send-Vibra
Additionally, the GUIDE BT provides haptic send mode confirmation (10x vibration).
This feature is enabled by default and can be disabled in the PIEPS APP device manager.
4.4 GROUP CHECK
Despite a comprehensive self-check, a beacon check (transmit check and receive check) is obligatory prior to
every tour! The BLACK DIAMOND GUIDE BT/RECON BT provides a group check function. In group check mode the
receiving range is limited to 1 m.
Group check regular
BLACK DIAMOND GUIDE BT/RECON BT
Check: frequency
Press and hold the button MARK (1D)
Start
during the group check countdown (CH)
•
"Distance indication" = OK
•
Result "ER" = error (frequency not
according to standard)
End
The Regular group check is sufficient for checking modern, digital devices with 3 antennas.
The Extended group check is recommended for checking old devices (analog single-antenna devices).
Regular group check display readings
Device not transmitting or
distance too big (> 1 m)
Manual BLACK DIAMOND GUIDE BT/RECON BT | 04/2020
4B 4C
Self-check OK Group check
countdown
Distance reading: device
transmitting and
4D
SEND display
Group check extended
GUIDE BT only
Check: frequency/pulse/period
Press and hold the button SCAN (1E)
during the group check countdown (CH)
•
"OK" = OK
•
"ER" = error (one or more transmit
parameters not according to standard)
Release button
Device transmitting but
frequency not according
to standard
4E
Self-check error
10 / 23