Creating A Title; Inserting A Title - Panasonic Palmcorder MultiCam PV-VM202 Mode D'emploi

2, 4, 5,
6, 7, 8
1
1) 2)
3) 4)
r
3, 4
1
TITLE
42

Creating a Title

You can create a title and record on a Memory Card.
1
W.B./SHUTTER/IRIS/
MF/VOL/JOG
2 1
PUSH
2
2
3
3
4
PHOTO
5
SHOT
6
7
8
Selecting Colors
If you make color selection by rotating the [PUSH] Dial when creating a title,
you can change the color as follows.
1) Original Color (The color of the captured image)
2) Preset colors (black, blue, green, cyan, red, pink, yellow, and white)
1)
3) Original color (the color of the captured image)
4) Preset colors (black, blue, green, cyan, red, pink, yellow, and white)
~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Title

You can select one of your original titles and display it. (It can be displayed in
Camera Mode, VCR Mode, and Card Playback Mode.)
But when the [STILL/MPEG4/VOICE] Selector Switch is set to [MPEG4] or
[VOICE], adding a Title is not possible.
1
2
W.B./SHUTTER/IRIS/
MF/VOL/JOG
2 1
3
PUSH
4
1
2, 4 5
6
PHOTO
SHOT
6
TAPE 5
CARD
2
Clearing a Title Display
Press the [TITLE] Button.
≥The [ACCESS] Indication appears until the titles are displayed completely.
USR00002.TTL
Perform the Recording after the indication disappears.
2
≥For other notes, see page 64.
Camera Mode:
Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and
point the camera at the image you want to use for creating a
title.
VCR Mode:
Search for the image you want to use for creating a title and
set the Palmcorder to Still Playback Mode.
Set [CARD SETUP] >> [CREATE TITLE] >> [YES].
Press the [PHOTO SHOT] Button.
≥The title is stored.
≥To perform PhotoShot again, select [RETURN].
Press the [PUSH] Dial to select [LUMINANCE].
Rotate the [PUSH] Dial to adjust the title contrast and then
press it.
Press the [PUSH] Dial to select [COLOR].
Rotate the [PUSH] Dial to select desired color and press it.
Select [RECORD] and then press the [PUSH] Dial.
≥Title in the original color in which the dark portion (blackish portion) of
the captured image is missing.
≥Title in a preset color in which the dark portion (blackish portion) of the
captured image is missing.
≥Title in the original color in which the bright portion (whitish portion) of
the captured image is missing.
≥Title in a preset color in which the bright portion (whitish portion) of the
captured image is missing.
Press the [TITLE] Button.
≥The title that was created last is displayed.
Press [MULTI] Button.
≥A list of titles is displayed.
Rotate the [PUSH] Dial to select a desired title.
≥The selected title is marked with a red frame.
Press the [PUSH] Dial or press the [MULTI] Button.
≥The selected title is displayed.
Using the [TAPE/CARD] Selector, select the recording
target.
Camera Mode: TAPE or CARD
VCR Mode: CARD
Card Playback Mode: TAPE
Press the [PHOTO SHOT] Button.
≥A still picture is recorded under the inserted title.
≥If you record on a Cassette in Normal Recording Mode, set the
[TAPE/CARD] Selector to [TAPE] and press the Recording Start/Stop
Button.
File Name
1