8311
1.1 Utilisation
- The 8311 controller has only been designed to measure the relative
pressure of a liquid or a gas
- The following units are available to display the measured pressure: bar,
kPa, psi, mPa, Torr, mmHg, atm, MWS, mbar
When using an absolute pressure unit (Torr, mmHg, atm, MWS),
be aware that the air pressure displacement (about 1013 mbar)
is not taken into account by the device.
- The measuring element must be solidly screwed onto its support
There will be no manufacturer warranty for damages caused by unexpec-
ted handling or wrong usage of the device The warranty on the device
becomes invalid if any modification or change is made on the device
The device should only be installed and repaired by specialist
staff. The user is not allowed to work on the cables inside the
housing. if any difficulties may occur with the product during
installation, please contact your nearest Bürkert sales office for
assistance.