Programming; General Recommendations; Functionalities; Simulation Mode - Burkert 8311 Manuel Utilisateur



PROGRaMMiNG

Pressure controller 8311

.1 General recommendations

Keep in mind that the process may be influenced by all the parameter
settings you make Fill-in the table on page 24 with your settings of the
controller

.2 functionalities

The device has three operating modes:
Normal mode
Display of the measured pressure and the switching thresholds pro-
grammed From the Normal mode, you can access the Calibration and
Simulation modes
Calibration mode
Access to the programming of all the parameters (unit, zero adjustment,
K-factor, calibration through the „Teach-in" feature, output, filter , bar-
graph) From the Calibration mode, you can go back to the Normal Mode

Simulation mode

Entering a theoretical pressure value to test the configuration program-
med in the Calibration mode From the Simulation Mode, you can go
back to the Normal mode