Box Contents; Installation - LAVAZZA EP 2302 Manuel Pour L'utilisateur

2) Good air circulation
The "Espresso Point" machine gets hot so it must therefore be positioned in a large
enough environment to avoid overheating.
Don't put the machine near electric or gas radiators or inside hot ovens.
3) Suitable fittings
The machine "Espresso Point" can be connected to a totalizer/prepaid unit; use only
appliances suggested by the manufacturing company.
The "Espresso Point" machine is designed to function at: 220-240V 50Hz.
NEVER insert the machine's power plug into a socket with a different voltage.
The socket used must be earthed.
Please check the feeder: it must be placed properly on the support surface of the machine
and it mustn't be put on hot surfaces.
Only components that operate at mains voltage are fitted to the machine. For this reason
NEVER remove the machine's outer casing or carry out repairs. Repairs may only be
carried out by specialist staff.
Don't use the machine with a damaged feeder or when the machine doesn't work properly.
Contact the maintenance personnel to have the repair made before further use.
Do not expose the machine to weather conditions and do not immerse in water.
If the red line is blinking, disconnect the machine and ask for the intervention of technical
assistance.
This box contains the following articles:
1 1 ) ) one EP 2302 / EP 2303 machine
2 2 ) ) this manual.
Position the machine on a horizontal surface.
Only for machines with provision for connection to the water mains:
only connect the machines to systems fitted with a stopcock.
It is not advisable to exceed the rated mains pressure of 5 Bars.

BOX CONTENTS

INSTALLATION

13
GB