Power Supply Connection; Gas Supply Connection - BORETTI IMPERATORE Serie Mode D'emploi

All manuals and user guides at all-guides.com
Installation
Note: This chapter is intended for the
fi tter of your cooker. The cooker
must be fi tted according to the
applicable standards and
always be installed by a professionally
qualifi ed fi tter. Boretti cannot be held
responsible for any defects or damage
due to incorrect installation.

Power supply connection:

220 / 230 VAC
220 / 230 VAC 2N2
240 VAC 240 VAC 2N2
2 4 E
1 3 5
L1 N E
220 / 230 VAC 3 380 / 400 VAC 2N
240 VAC 3 415 VAC 2N
2 4 E
1 3 5
L1 L2 L3 E

Gas supply connection:

The cooker can be connected to a fi xed gas pipe
or a fl exible GIVEG-approved tube. You will need
a coupling with an adapter with a 12" internal
thread and a gas tube screwed externally for the
connection.
should
380 / 400 VAC 3N
220 / 230 VAC 3N
2 4 E
1 3 5 1
L1 L2 N1 N2 E
2 4 E
1 3 5
L1 L2 N E
Fitting of the cooker:
To facilitate the fi tting, the rear of the cooker
has wheels. It is very important that the cooker
is placed on a sturdy and level surface. Set the
cooker at the right height by means of the bolts
on the wheel construction and by unscrewing the
front legs until the desired height is obtained.
.
415 VAC 3N
240 VAC 3N
2 4 E
3 5
L1 L2 L3 E
N
55
NL
FR
DU
EN