Titan PowrPlast 1000 Mode D'emploi page 28

GB
TABLE OF CONTENTS
Table of Contents
1 SAFETY REGULATIONS ______________________ 29
2 INTRODUCTION TO WORKING WITH THE
MORTAR SPRAYING MACHINE POWRPLAST 1000 31
2.1 Function of the mortar spraying machine
PowrPlast 1000 ______________________________ 31
2.2 Processible coating materials ___________________ 31
3 TECHNICAL DATA ___________________________ 31
4 EXPLANATORY DIAGRAM FOR POWRPLAST 1000 32
4.1 Operating elements and displays on device _______ 33
4.2 Drive _______________________________________ 33
4.3 Compressor (accessory) _______________________ 34
4.4 Mortar hose for pneumatic spray lance ___________ 34
4.5 Mortar hose for automatic spray lance ___________ 34
4.6 Spray lance _________________________________ 34
5 TRANSPORTATION __________________________ 35
5.1 Moving _____________________________________ 35
5.2 Transport using a crane ________________________ 35
5.3 Transportation in vehicle ______________________ 35
6 COMMISSIONING ___________________________ 35
6.1 Installation location ___________________________ 35
6.1.1 Connection to mains power supply/ Extension cable 35
6.2 Initial starting-up _____________________________ 35
6.2.1 Scope of supply ______________________________ 35
6.2.2 Assembly ___________________________________ 36
6.2.3 Assembling the bag support (accessory) __________ 36
6.3 Connecting the mortar hose ___________________ 37
6.3.1 Automatic spray lance _________________________ 37
6.3.2 Pneumatic spray lance ________________________ 37
6.4 Compressor (accessory) _______________________ 37
6.5 Spray attachment assembly (accessories) _________ 37
6.6 Connecting the spray lance ____________________ 38
6.7 Remote control (accessory) ____________________ 38
6.7.1 Remote control assembly ______________________ 38
6.8 Preparing the mortar spraying machine __________ 39
6.8.1 Rinse the mortar tube (Automatic spray lance) ____ 39
6.8.2 Rinse the mortar tube (Pneumatic spray lance) ____ 40
6.8.3 Filling the container with a bag support __________ 40
6.9 Beginning of the spraying process _______________ 40
6.10 End of the spraying process ____________________ 40
28
7 GENERAL INFORMATION ABOUT THE
APPLICATION TECHNIQUE ___________________ 41
7.1 Spraying technique ___________________________ 41
8 SHUTTING DOWN AND CLEANING ____________ 41
8.1 Cleaning the mortar hose ______________________ 41
8.2 Cleaning the device and replacing the stator ______ 41
8.3 Cleaning the spray lance _______________________ 43
9 MAINTENANCE _____________________________ 43
9.1 Mechanical maintenance ______________________ 43
9.2 Electrical maintenance ________________________ 43
9.3 Long periods of non-usage _____________________ 43
9.4 Rotor replacement ___________________________ 43
10 ELIMINATING FAULTS ________________________ 44
11 SPARE PARTS LIST FOR POWRPLAST 1000 _____ 47
12 SPARE PARTS LIST OF SPRAY LANCE __________ 48
13 POWRPLAST 1000 ACCESSORIES ______________ 49
Testing of the mortar spraying machine _______________ 51
Note on disposal __________________________________ 51
Important information on product liability_____________ 51
Guarantee declaration _____________________________ 51
CE declaration of conformity _______________________ 104
Service network _________________________________ 108
PowrPlast 1000