How To Check The Installation; Under Windows; Under Mac Os X - Digigram VX222v2 Manuel Utilisateur

D i g

HOW TO CHECK THE INSTALLATION

Under Windows

Once the driver and the cards are installed according to the procedure
described in this manual, you can verify that the card is properly installed and
works fine as follows:
•
Go to <Start> <Programs> <Digigram> and select Digigram Control
Center.
•
In the Digigram drivers window, select the General Information tab.
In the Modules Information window the installed VX Kit modules are
displayed along with their versions.
•
In the Digigram drivers window, select the VX Setup tab for a list oft
the installed cards. Each card is represented by an icon.
•
Click on the 'Windows Multimedia properties' button to open the 'Sound
& Multimedia properties' window. Select the Audio tab.
•
The card devices are listed:
•
•
•
In case the card is not displayed:
•
make sure that the card is correctly inserted in the PCI slot, and screwed
on the PC chassis.
•
if necessary, uninstall the VX Kit package as described in this manual,
and re-install it.

Under Mac OS X

Once the driver and the card are installed, the card is listed in the VX Control
panel, the Sound panel, and the Audio Midi Setup panel.
You can then use the card with your audio application.
12
i g r a
VX222 Out #1 in Sound playback, preferred device. This
v2
is a Wave device.
VX222 In #1 in Sound recording, preferred device. This
v2
is a Wave device.
VX222 Audio Card (WDM) in both playback and
v2
recording, preferred device. This is a DirectSound device.
m