Specifications; Configuration; Inputs / Outputs - Digigram VX222v2 Manuel Utilisateur

SPECIFICATIONS

CONFIGURATION

Bus/Format
Size
Digital Signal Processor
Power requirements
(+3.3 V / +5 V / +12 V / –12V)
Operating: temp / humidity (non-
condensing)
Storage: temp/humidity
(non-condensing)

INPUTS / OUTPUTS

Analog line inputs (stereo)
Maximum input/impedance
Programmable input gain
Digital inputs (stereo)
Other inputs
Analog outputs (stereo)
Maximum output/impedance
Programmable output level
Digital outputs (stereo)
Other outputs
Access to main status bits of digital
frame
AES11 synchronization
Connectors
User's Manual
PCI slave mode
226 mm × 99 mm
56303 at 100 MHz
0.5A / 0.1A / 0.2A / 0.1A
0°C/+50°C • 5%/90%
-5°C/+70°C • 0%/95%
1 balanced
+22 dBu / >10kΩ (jumper ON)
+10 dBu / >10kΩ (jumper OFF)
digital
2 AES/EBU or S/PDIF
2 GPI (dry contact)
1 balanced
+22 dBu/low impedance
digital and analog
1 AES/EBU or S/PDIF
headphone (600 Ω), two GPI (relay,
0.5A, 48 VCC)
Yes
Yes
15-pin SUB-D for analog I/O,
15-pin HD SUB-D for digital I/O,
and GPI
VX222
v2
25