Setting The Default Values For Each Mixer Line Selected; Getting The Default Configuration Values For The Mixer Line Selected; Leaving The Mixer Program; General Settings - Digigram VX222v2 Manuel Utilisateur

Setting the default values for each mixer line selected

Right click on the mixer icon in the taskbar, or go to the mixer Options menu.
Select Save current configuration as default.
Getting the default configuration values for the mixer line
selected
Right click on the mixer icon in the taskbar, or go to the mixer Options menu.
Select Load default configuration.

Leaving the mixer program

Click on the right button over the mixer icon in the taskbar.
Select Exit.

General settings

Record source

The record source section contains two buttons allowing selection of the input
type used.
•
Digital Input: selects the digital input.
•
Analog Input: selects analog input.

Clock source

This option allows the selection of the synchronization clock source.
•
Automatic: selects the internal clock when analog input is selected, the
digital input clock when digital input is selected.
•
Digital: selects the digital input regardless of the source input selection.
VX222
User's Manual
v2
19