Vx222 Settings Under Mac Os; Vx Control Panel - Digigram VX222v2 Manuel Utilisateur

VX222 SETTINGS UNDER MAC OS X
v2
Several control panels are available to adjust the settings of the VX222
parameters can be adjusted from different panels. If a parameter is modified in
a panel, its value is automatically updated in another panel.

VX Control panel

Use the VX Control panel to set the following parameters of your VX card:
•
choice of card VX (if several VX cards are installed, they are noted as:
VX222:0, VX222:1, etc...)
•
latency (Internal Buffer Latency): a low latency value may lead to
overloads in the audio causing clicks. If this happens, increase the
latency value
•
sample size: 16 or 24 bits
•
selection of the input source: digital, line, line with digital
synchronization
•
hardware monitoring: can be activated or disabled by (un)checking
"Monitoring Input 1 2" (Monitoring Input 3 4 is inactive).
•
digital input gain from -72 dB to +18 dB: the active cursor (Digital Input
1 2) allows simultaneous adjustment of the digital gain for both inputs.
VX222
User's Manual
. Some
v2
v2
13