Grille And Drip Basin; Discharge Basin - Faema SMART/A Utilisation Et Installation

STEAM NOZZLES AND HOT-WATER DISPENSING PIPES -
Using a clean sponge, wash with hot water removing any
organic residue present. Rinse carefully.
Do not use abrasive products.
To clean the inside of the steam nozzles, follow these steps:
Turn the nozzle towards the cup tray and carefully activate
steam dispensing at least once.
NOTE: the procedures described below can also be carried out when the machine is switched off.

GRILLE AND DRIP BASIN -

1
Remove the grille from the
basin.

DISCHARGE BASIN

- T
Pour about a liter of hot water into the discharge basin to
remove any discharge residues.
BODYWORK -
Use a soft cloth and cleaning products WITHOUT ammonia
or abrasives, removing any organic residue present in the
work area.
NOTE. Do not spray liquids into the panel slots.
All manuals and user guides at all-guides.com
2
Extract the basin.
15 EN
3
Rinse the grid and tray
under running water.