Stihl TSA 230 Notice D'emploi page 61

4
Use the combination wrench to
N
loosen the hexagon head screw (2)
Release the spindle locking
N
mechanism and unscrew the
hexagon head screw (2)
Remove the front thrust washer (3)
N
from the shaft together with the
abrasive wheel (4)
TSA 230
Fitting an abrasive wheel
3
2
Fit the new abrasive wheel (4)
N
WARNING
Note the arrows indicating the direction
of rotation on diamond abrasive wheels.
Position the front thrust washer (3)
N
so that the words "TOP SIDE" are
visible
Screw in the hexagon head
N
screw (2)
4
3
2
N
N
N
Never use two abrasive wheels at the
same time. The uneven wear creates a
risk of breaking and an injury hazard!
1
Press and hold the spindle locking
mechanism (1)
Turn the shaft with the combination
wrench until the shaft is blocked
Tighten the hexagon head screw
with the combination wrench – if
using a torque wrench, refer to the
"Specifications" for the tightening
torque
WARNING
English
59