Stihl TSA 230 Notice D'emploi page 46

English
Leaving the cut-off machine
–
unattended
Transport
–
Storage
–
Performing repairs and
–
maintenance work
In the event of danger or in an
–
emergency
This avoids the risk of the engine
starting unintentionally.
Intended use
The cut-off machine may only be used
for cutting. It is not suitable for cutting
wood or wooden objects.
Do not use the cut-off machine for any
other purpose – risk of accidents!
Asbestos dust is extremely toxic - the
machine must therefore never be used
to cut asbestos!
STIHL recommends operating the cut-
off machine with STIHL batteries
type AP.
For work that is not carried out on the
ground, only operate the cut-off machine
with STIHL batteries type AP placed
directly in the machine.
Do not modify the cut-off machine in any
way – this may increase the risk of
personal injury. STIHL excludes all
liability for personal injury and damage
to property caused while using
unauthorized attachments.
44
Clothing and equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
and snug-fitting, but allow
complete freedom of
movement. Tightly fitting
clothes – overall, no
smock
When cutting steel, always wear clothing
made of flame-resistant material (e. g.,
leather or cotton with flame-retardant
finish) – no manmade fibers – risk of fire
due to flying sparks!
Clothing must be free from flammable
deposits (chips, fuel, oil, etc.).
Do not wear such clothes that can be
caught by moving parts – no scarf, no
tie, no jewelry Tie up and confine long
hair.
Wear safety boots with
steel toe caps and non-
slip soles.
Wear a hard hat wher -
ever there is any risk of
falling objects. Wear a
face shield and always
wear safety glasses –
danger due to flying
objects.
Facial protection does not provide
adequate protection for the eyes.
While working, dust (for
example, crystalline
material from the object
to be parted-off), vapor
and smoke may be pro -
duced – danger for
health!
Always wear a dust mask if dust is
generated.
If fumes or smoke are anticipated (e. g.,
when cutting composite materials), wear
respiratory protection.
Wear "personal" noise protectors – for
example, ear protectors.
Wear sturdy protective
gloves made of a resist -
ant material (e. g.
leather).
STIHL can supply a comprehensive
range of personal protective clothing
and equipment.
Check the condition of the equipment
before use and replace broken parts.
Transport
Before transport – even over shorter
distances – always switch off the
machine, set the locking lever to ƒ and
remove the battery from the cut-off
machine. This avoids the risk of the
engine starting unintentionally.
Allow the cut-off machine or battery to
dry out separately if they are wet after
use. During transport, make sure that
the cut-off machine and battery remain
dry. Only transport the battery in clean
and dry containers, do not use metallic
transport containers.
TSA 230