Safety Warnings - Makita DFT085F Manuel D'instructions

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening torque
No load speed
Dimensions (L x W x H)
Rated voltage
Standard battery cartridge
Charger
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DFT085F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DFT127F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model DFT085F
Work mode: screwdriving without impact
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
Model DFT127F
Work mode: screwdriving without impact
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
Hard joint
Soft joint
with BL1415 battery
with BL1430 battery
) : 70 dB(A) or less
pA
) : 70 dB(A) or less
pA
2
or less
2
2
or less
2
DFT085F
3 - 8 N•m
3 - 8 N•m
-1
150 - 900 min
190 mm x 72 mm x 237 mm
190 mm x 72 mm x 254 mm
BL1415, BL1415N, BL1415NA, BL1430, BL1430A, BL1430B,
BL1440, BL1450, BL1460A, BL1460B
DC18RC, DC18RD, DC18SD, DC18SE, DC18SF
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
4 ENGLISH
DFT127F
5 - 12 N•m
5 - 12 N•m
100 - 600 min
D.C. 14.4 V
1.3 - 1.8 kg
-1