Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLE SHOOTING
When your air conditioner seems to be out-of-order, please check the suggestions below
before contacting after-sales service.
Problems
The appliance does
not work.
The appliance
works only for a
while and then it
stops
automatically.
Possible causes
- Verify if the appliance is
plugged in properly.
- Verify if the power cord or
socket is damaged.
- Verify if the fuse is broken.
- If you are using a remote
control, verify if the battery
is exhausted.
- The appliance has
entered security mode.
- Verify if the air outlet is
blocked by any bulky object.
- The timer has been
activitated.
EN-18
Solutions
- Perform the connection of
appliance properly
- Contact an electrician for its
replacement.
- Contact your service provider
to have it replaced. (For fuse
specification, please refer to
Technical characteristics.)
- Replace the battery of the
remote control by a new one.
- Allow 3 minutes
before pressing the power-on
button as the protection
device may be activated.
- Remove the obstacle.
Turn on the appliance again.
Then set the timer.
Publicité
Table des Matières
