Oceanic OCEACLIM700W1 Guide D'utilisation page 33

INSTALLATIONS
A. Disposal of packaging materials
Packaging carton and paper can be recycled. Those have to
be placed in suitable collection bins.
Materials with the symbol
PE => polyethylene
➢
PS => polystyrene
➢
PP => polypropylene
➢
This means they can be recycled by putting them in suitable
collection bins.
Other packaging items (adhesives, fasteners, etc.) must be
put in the domestic waste.
B. Location and installation of the accessories
The mobile aircon must be placed beside a window, a
door or a window.
To avoid over-heating of your appliance, a minimum
distance of 60cm must be kept between the back of the
appliance and the wall, or any bulky object.
Advice for water drainage set-up
Water is produced during cooling and dehumidifying.
Therefore, you need to set up a drainage system. You can
either choose to set up an automatic (continuous) drainage
system or drain the water manually.
a. Automatic Drainage
Water drainage is continuous if you use the upper drainage
port (secondary drainage port) with a drainage pipe. For
instructions on set-up, please refer to MAINTENANCE AND
CLEANING).
b. Manual Drainage
Water fills up an internal recycling tank during operation,
and when the tank is full, the alarm will sound and the
compressor will stop working, indicating that the water tank
should be emptied.
For how to manually empty water from the tank to resume
operation, please refer to MAINTENANCE AND CLEANING.
C. Installation of the exhaust hose and the adapter
Extend the air exhaust duct by drawing out the two ends
1.
of the duct.
are recyclable.
Screw the air exhaust duct into the connector of the
2.
air exhaust duct.
Connect the exhaust duct to the unit.
3.
Never obstruct the air outlet.
D.Installation of the battery
-Compatible with a CR2025(3V lithium battery)
a. Slide the cover to open the compartment
b. Place the battery in the slot respecting the poles (anode
and cathode)
c. Put the cover back
If you do not use the remote control for prolonged period of
time, remove the battery from the remote control.
EN-11