Installation Options - Stiebel Eltron Soki basic Utilisation Et Installation

InStallatIOn
InStallatIOn

6.2 installation options

6.2.1 wall mounting
f Remove the front thermal insulation.
f
f mark out the holes for drilling through the thermal f
insulation.
f drill the holes. f
f Secure the wall mounting bracket, which is pre-assembled f
in the rear section of the thermal insulation, to the wall
using the screws and rawl plugs supplied.
20 |
6.2.2 installation on the cylinder
1 twin nipple (g 1) for connection to the cylinder
2 gasket
3 union nut
4 Sensor well for the temperature sensor
5 Connection at the SOKI flow meter
with the cylinder connection set, the solar compact installation
can be fitted directly to the cylinder.
f Fit the twin nipples from the cylinder connection set for
f
the flow and return into the connections of the solar indi-
rect coil in the cylinder and seal them in.
f using the union nut, secure the flow line of the cylinder f
connection set.
f to secure the return line to the solar compact installa-
f
tion, first remove the flow meter from the solar compact
installation.
f Join the flow meter and return line of the cylinder connec- f
tion set.
f Refit the flow meter to the pump assembly. f
f using the union nut, secure the solar compact installa- f
tion to the twin nipple that you previously sealed into the
cylinder.
1
5
2
3
4
1
2
3
SOKI basic