Installation; Safety; General Safety Instructions; Appliance Description - Stiebel Eltron MINI-E 2-1 Utilisation Et Installation

SAFETY

INSTALLATION

7. Safety
Only a qualifi ed contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1

General safety instructions

We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the appliance
are used.
Material losses:
!
Observe the max. permissible inlet temperature. Higher
temperatures may damage the appliance. You can limit the
inlet temperature by means of a central thermostatic valve
(See 8.2, "Optional accessories", pg. 8).
Note:
Observe all applicable national, state & local regulations
codes, and instructions.
8 | MINI ™ -E SERIES TANKLESS ELECTRIC WATER HEATERS
8.

Appliance description

8.1

Standard delivery

The following are delivered with the appliance:
- Filter screen in the cold water inlet
- A erator
- Power cable
8.2

Optional accessories

Mini-E TLC - Thermostatic mixing valve
For ASSE 1070-2004 compliance, use optional Mini-E TLC kit available
from Stiebel Eltron.
Visit www.stiebel-eltron-usa.com for more information.
9.

Preparations

 Flush the water line thoroughly. 
Water installation
A safety valve is not required by Stiebel Eltron, but one may be
required by local plumbing code. Check the codes before installation.
WWW.STIEBEL-ELTRON-USA.COM