Important Safety Information - Abus TVVR33004 Notice D'utilisation

Important safety information

Explanation of symbols
The following symbols are used in this manual and on the
device:
Signal
Symbol Meaning
word
Warning Indicates a risk of injury or health
hazards.
Warning Indicates a risk of injury or health
hazards caused by electrical
voltage.
Important Indicates possible damage to the
device/accessories.
Note Indicates important information.
The following annotations are used in the text:
Meaning
...
1. Required action to be carried out in a set order
...
2.

...
List without a set order, given either in the text
or warning notice

...
Intended use
Only use the device for the purpose for which it was built
and designed. Any other use is considered unintended!
This device may only be used for the following
purpose(s):

When connected to video signal sources
(analogue/HD-TVI cameras) and video output
devices (TFT monitor), this 4-/8-Channel Analogue
HD Video Recorder is used to monitor objects.
Note
Data storage is subject to national data privacy
guidelines.
When carrying out the installation advise your
customers of the existence of this guideline.
All manuals and user guides at all-guides.com
General
Before using this device for the first time, please read the
following instructions carefully and observe all warning
information, even if you are familiar with the use of
electronic devices.
Retain this handbook for future reference.
If you sell or pass on the device on to third parties, you
must include these instructions with the device.
This device has been manufactured in accordance with
international safety standards.
Power supply





Important safety information
Warning
All guarantee claims are invalid in the event of
damage caused by non-compliance with this user
manual.
We cannot be held liable for resulting damage.
Warning
In the event of personal or material damage
caused by improper operation or non-compliance
with the safety information, we cannot be held
liable.
All guarantee claims are void in such cases.
Only operate this device through a power source
which supplies the mains power specified on the type
plate.
If you are unsure of the available power supply,
contact your utility company.
Warning
Prevent data loss.
Always use the device with an uninterruptable
power supply UPS with surge protection.
Disconnect the device from the power supply before
carrying out maintenance or installation work.
The on/off switch on this device does not fully
disconnect it from the mains supply.
To fully disconnect the device completely from the
mains, the mains plug must be withdrawn from the
mains socket. The device should therefore be
positioned so that there is always direct and
unimpeded access to the mains plug and the plug
can be removed immediately in the event of an
emergency.
71