Abus TVVR33004 Notice D'utilisation page 97

Warning
Set the response of the recorder for warning messages
and system events here. To do this, activate the "Enable
Event Hint" setting.
You can trigger a warning for the following error types:

HDD Full

HDD Error

Network Disconnected

IP Conflicted

Illegal Login

Input/recording resolution mismatch

Exception Error
Parameter
Audible Warning
Notify Surveillance
Center
Send Email
Trigger Alarm Output
97
All manuals and user guides at all-guides.com
Notifications
The device emits a repeated
signal tone.
A notification is sent to the
CMS software event log.
An email is sent to a
specified email address.
The selected alarm output is
switched in the event of a
fault.
User
Warning
Note down the admin password.
The preset password is:
1 2 3 4 5
"
In user management, you can add new users, delete
users, and amend existing settings.
1. To add a new user, select Add.
Parameter Setting
User Name Unique identification
Password Access code for the device, for the
purpose of device management.
Note: change your passwords
regularly, using a combination of
letters and numbers etc. and note
them down to be stored in a safe
place.
Confirm Enter the access code again for
security.
Level IMPORTANT:
More rights can be set on the
Operator level than on the Guest
level.
Configuration
".