DST Settings
Setting
tab
Auto DST
If the box is ticked, the device
Adjustment
switches automatically to daylight
saving time.
Enable DST
If the box is ticked, a specific start/end
date can be selected.
From/to
Start/end date for daylight saving time.
DST Bias
Daylight Saving Time bias: correction
of daylight saving time to reference
time.
More settings Settings
Name
Unique specification of the device.
No
Used for unique identification when
using CMS software.
Auto. log off
Never/1–30 minutes: controls how
long the menu is displayed before it is
hidden again.
Menu Output
Use to specify the monitor output for
Mode
the menu display. If set to auto, the
recorder will detect the output.
Confirm the settings by clicking on Apply and exit the
menu by clicking on OK.
Network configuration
General
It is essential that the network settings are correct if you
want to control the device and monitor remotely via
your browser.
Note
Please read the following general instructions
before setting up the device.
A network is the connection of at least two network-
compatible devices.
Transmission methods:
wired networks (e.g. CAT5 cable)
wireless networks (WLAN)
other transmission types (Powerline)
All systems have significant similarities but are different
in various ways.
89
All manuals and user guides at all-guides.com
Terms
Below there is an overview of terms related to using the
device on networks.
Parameter
IP address
Private
address range
Subnet mask
Gateway
Name server
Configuration
Setting
An IP address is the unique address of
a network device on a network.
It must only appear once on a network.
Certain IP address ranges are
reserved for public networks, such as
the internet.
E.g. 10.0.0.0–10.255.255.255
Subnet mask: 255.0.0.0
172.16.0.0–172.31.255.255
Subnet mask 255.255.0.0
192.168.0.0–192.168.255.255
Subnet mask 255.255.255.0
A subnet mask is a bit mask that is
used to make decisions and
assignments during routing.
The standard subnet mask on home
networks is 255.255.255.0.
A gateway is a network device that
allows all other network devices to
access the internet.
It can be, for example, the computer to
which the DSL modem is connected
or, most frequently, the router or
access point on the network.
The name server, also known as the
DNS (Domain Name Server), is
responsible for assigning a unique IP
address to a web address or URL (e.g.
www.google.de).
When a domain is entered into a
browser, the DNS searches for the
corresponding IP address of the server
and forwards the query on to it.
The IP of the provider's DNS can be
entered here. However, it is often
sufficient to select the IP of the
gateway. This then forwards the
queries independently to the provider
DNS.