Abus TVVR33004 Notice D'utilisation page 95

Linkage Action tab
Select the Linkage Action tab. Here you can configure
the response of the recorder in the event of an alarm by
ticking the corresponding box.
Parameter
Full Screen Monitoring
Audible Warning
Notify Surveillance
Centre
Send Email
Trigger Alarm Output
PTZ Linking tab
Here you can control specific PTZ presets, patrols or
patterns for a taught-in camera.
Parameter Notifications
PTZ Select the camera to be controlled
using a PTZ command in the event of
an alarm.
95
All manuals and user guides at all-guides.com
Notifications
The camera is displayed in
full screen in live view.
The device emits a repeated
signal tone.
The CMS emits an audible
warning tone.
An email is sent to a
specified email address. See
page 92.
The alarm output is triggered
in the event of an alarm.
Call Preset Select the preset number.
Call Patrol Select the patrol number.
Call Pattern Select the pattern number.

Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
Alarm Output tab
Parameter Setting
Alarm Select the alarm output to adjust the
Output No. settings.
Alarm Name Enter a clear description, e.g. warehouse
door contact.
Dwell Time Select the dwell time for switching the
alarm output.

Activate the alarm output by ticking the "Settings"
box.

Define the schedule for the recorder alarm output in
the event of an alarm under "Settings".

Click on Copy to apply these settings to other
cameras.

Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
Configuration