Alde Compact 3010 Manuel page 11

OPERATING INSTRUCTIONS CONTROL PANEL 3010 614
Please read these instructions carefully before using the boiler. For Operating and Installation Instructions
of boiler, please see separate instruction. These instructions are for the Alde Compact 3010 boiler fitted in vehi-
cles, in accordance with ANSI 21.13, CSA 4.9. Installation and repairs may only be carried out by a professional.
National regulations must be adhered to.
1. Starting the boiler
1. The control panel and the boiler
are switched off.
2. The control panel in standby mode
NOTE: if "Standby Brightness" is set to Off, the display goes out when it enters standby mode, but lights up if you
press the screen. See settings under 9.12.
D E
72°F
C
B
42°F
A
Fri 18.30
G F
3. From standby mode to setting menu
When on standby, the indoor temperature is displayed, and the outdoor temperature is displayed if an outdoor tem-
perature sensor has been connected. The background lights up when you press the screen or the MENU button. Start
the setting menu by pressing the MENU button. The background lights up and those functions which can be set are
displayed. The settings are automatically saved after 10 seconds. The control panel reverts to standby automatically
after 30 seconds if no buttons are pressed (or if the MENU button in the setting menu is pressed).
1. The control panel in standby.
72°F
42°F
Fri 18.30
2. To start the boiler, press the On/Off button
and the start-up display is displayed. The
boiler starts with the last selected setting.
A. Clock
The clock shows day and time. The
clock is set under section 9 point 2.
B. Outdoor temperature
The outdoor temperature is displayed
if a sensor probe is installed.
C. Indoor temperature
The indoor temperature is displayed
automatically.
2. The control panel in setting menu.
3010
A green LED comes on beside
the On-/Off button when the
panel/boiler is on.
D. Circulation pump
This symbol is displayed when the
circulation pump is requested.
E. 120 volts
This symbol is displayed when 120V
is connected to the boiler.
F. MENU button
Button for setting menu.
G. On/Off button
Shut down / turn on the boiler.
72°F
2
NOTE: if "Standby Brightness" is
set to Off, the display goes out
ON
Off On
when it enters standby mode, but
lights up if you press the screen.
See settings under 9.12.
11