Staufenbiel Epsilon XL V3 Instructions De Montage page 21

01
02
03
04
THE FUSELAGE
ARF VERSION ONLy
Bring the servo for rudder and elevator into middle
positon with a servo tester and mount the servo horns.
Screw the servos to the servo tray.
ARF VERSION ONLy
Create two cable beams with MPX-plug for aileron
and flap. Glue the MPX-plug to the fuselage in the
designated hole. Glue the wing lock bushing to the
fuselage as well.
Put the three CA-hinges into the slots of the vertical
stabilizer and glue them with thin CA. A needle can
help when applying the CA.
Mount the rudder, adjust it thoroughly and apply
some drops of CA to mount it permanently.
EN
21