Breville BES820XL Manuel page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OpERATINg YOuR BREVILLE DIE CAST pROgRAMMABLE ESpRESSO MACHINE (continued)
pROgRAMMED ESpRESSO – DOuBLE Cup
Press the two cup
button once.
After a few seconds, aromatic coffee will
begin to brew into the cup. A pumping
noise will be heard in this operation. The
machine will automatically stop once the
preset pour has been delivered.
NOTE: The minimum pour for
one cup
and two cups
is set at ½ oz (15ml).
NOTE: pressing the one cup
two cup
buttons during
a programmed espresso will
immediately stop the pour.
pROgRAMMINg SINgLE ESpRESSO
1. Prepare to make a single cup of
espresso by following steps 2 to 6 in
'Operating your Espresso Machine',
pages 14-16.
2. Place your cup underneath the group
head.
3. To begin programming, press the
'PROGRAM' button once. The machine
will beep once and the program button
will begin to flash. This indicates the
machine is in programming mode.
4. Press the one cup
The machine will commence normal
pour function, and the one cup button
surround will begin to flash.
5. When the desired amount of espresso
has poured into the cup, press the
one cup
button to stop the pour.
The machine will beep twice,
indicating it has saved your measured
pour quantity and exited programming
mode.
or
pROgRAMMINg DOuBLE ESpRESSO
1. Prepare to make a two cup of espresso
by following steps 2 to 6 in 'Operating
your Espresso Machine', pages 14-16.
2. Place your cup underneath the group
head.
3. To begin programming, press the
'PROGRAM' button once. The machine
will beep once and the program button
will begin to flash. This indicates the
machine is in programming mode.
4. Press the two cup
once. The machine will commence
normal pour function, and the two cup
button surround will begin to flash.
button once.
5. When the desired amount of espresso
has poured into the cup, press the
two cup button
The machine will beep twice, indicating it
has saved and exited programming
mode.
RESETTINg DEFAuLT VOLuMES
To reset the machine to the default one
and two cup pour quantities, press and
hold the program button, until the machine
beeps three times. Release button. This
indicates the machine has returned to its
original default settings.
NOTE: Default settings: one cup
button
to stop the pour.
pour is
approximately 1 oz. Two cups
is approximately 2 oz.
17

Publicité

Chapitres

Table des Matières
loading

Table des Matières